The DS150i Series Exit Sensors are Passive Infrared Detectors specifically designed for “request to-exit” applications. They detect motion in their coverage area and signal an Access control system or door control device.


FEATURES:
• Single or Double Door Use
• Wall and Ceiling Mountable
• Internal Vertical Point-ability
• Wrap-Around Coverage Pattern
• 12 or 24 AC or DC Operation
• Up to 60 Second Adjustable Latch Time
• Selectable Relay Trigger Mode
• Selectable Fail Safe/Fail Secure
• UL Listed
• CE Approved
 

SPECIFICATIONS:

• POWER REQUIREMENTS 12 or 24 VAC or VDC, 26 mA @ 12 VDC
• RELAY OUTPUT Two Form “C” Contacts
• RELAY LATCH TIME Adjustable to 60 seconds
• RELAY MODE Programmable re-trigger or non-re-trigger mode
• POWER LOSS DEFAULT Programmable Fail Safe or Fail Secure modes
• STORAGE & OPERATING TEMPERATURE -20° to +120°F / -29° to +50°C
• TEST FEATURES Externally visible activation LED
• DIMENSIONS 1.5" H., by 6.25" W., by 1.5" D. / 3.8 cm H., 15.8 cm W., 3.8cm
• COVERAGE 8 ft. by 10 ft. / 2.4 m by 3 m
• MOUNTING Surface Mount
• PATTERN POINT-ABILITY ±14° Vertical
• RADIO FREQUENCY INTERFERENCE (RFI) IMMUNITY No alarm or setup on critical frequencies in the range
• from 26 to 1000 Megahertz at 50 v/m.
• LISTING UL Listing BP6245