|
YOUR BABY WILL BE THE SAFEST SLEEPER IN THE HOUSE!
 Never worry about being unavailable to monitor your child again!
This revolutionary Pan/Tilt baby monitor allows you to monitor a
sleeping baby from a variation of different angles, while moving
freely throughout your home. You can also use the HS1000PT Baby
Monitor to covertly monitor the traffic in any location you wish,
which proves to be a useful tool if you have even the slightest
concern that something is going on in your home that you do not
approve of.
Simply place this small monitor in the desired location,
I.E. a teenagers bedroom, or an alternative room of reasonable
suspicion, and you can have up to three wireless receivers to find
out what is really going on while you are not there. This unit is
also as a security device for the home or office, and with it's much
smaller and less noticeable casing than most large bulky cameras,
you will be able to capture activity that would otherwise may not
occur around noticeable equipment.
Since our prior version of the
device, this 2008 edition has improved upon previous models by
having a wider area of Pan/Tilt capability, and you can be sure to
keep everything "Green" since this model is much more conservative
on energy. The reception on this wireless device is also very
reliable in the busiest of offices, as well as high traffic homes
with multiple wireless devices, so you can rest easy with the
HS1000PT on guard!
FEATURES: A wireless receiver with an LCD view screen. Video resolution of 640 x 240 pixels
Motion/voice detector and alarm available with sensitivity adjuster. IR night vision capability. Built-in microphone for audio
Battery in receiver lasts for up to 5 hours of continuous use! 3 different channel frequencies to avoid interference between units
SPECIFICATIONS: Up to 100m (330-feet) transmission range in open space Transmission frequency: ISM 2,400 to 2483MHz
Transmission power: 10mW/CE and 2mW/FCC Operating frequency: 2,414, 2,432, 2,450 and 2,468MHz Unobstructed effective range: 100m (minimum)
Modulation mode: FM Operating temperature: -10 to 50 and +14 to 122 degrees Celsius
Operating humidity: ≤85% Camera imaging sensor type: CMOS
Total pixels: (NTSC): 720 x 480 pixels (PAL): 720 x 576 Pixels Minimum illumination: 0 Lux (IR on)
Night vision distance: 5m View Angle: 62 degrees Battery working time: 8 hours (IR off)
Motion alarm distance: 5m Sound detection sensitivity: 65 ±5dB
Maximum current consumption: 230mW (IR on) Maximum current consumption: 160mW (IR off)
Image resolution: 320 x 240 pixels at 10fps Power supply: +9V DC
Dimensions: (W) 104 x (D) 110 x (H) 123mm Weight (about): 267g
Receiver Screen
2.5-inch TFT LCD
Effective pixels: 640 x 240 pixels Video system: NTSC/PAL Color configuration: RGB
Li-battery working time: 4-5 hours Receiving Sensitivity: ≤-85dBm
Maximum current consumption: 200mA Power supply: +9V DC
|
PART # |
DESCRIPTION |
COST |
AVAILABILITY |
ADD |
|
BAM-1
|
Pan/Tilt baby monitor w/ Wireless Receiver with
built-in controller |
$320.00
$389.00 |
YES
FREE SHIPPING* |
|
*FREE Ground shipping lower 48 US States ONLY!
Details
Additional Cameras - You can add a total of
three cameras on BAM-1 unit.
|
PART # |
DESCRIPTION |
COST |
AVAILABILITY |
ADD |
|
BAM-1CAM
|
Pan/Tilt Camera |
$165.00
$294.00 |
YES
|
|
|