Serving the Surveillance & Access Control Industry
Toll Free: 1-866-936-6789

 

 

TRACK ORDERCONTACT USNEW ITEMSCHECKOUTVIEW CARTABOUT USHOME

 

 

You are here:  ESLI's Home Page>MagLocks> Access Control Magnetic Door Lock Exit Buttons

 

PRODUCT PAGES
Drop Down Menu

 

FREE Shipping on orders $249.00 & over*

 

 

 

 

 

SPECIAL ITEM

Diasonic Linear PCM Pro Voice Recorder

 

 

*Free Ground shipping lower 48 US States ONLY!  Details

 

Access Control Magnetic Door Lock Exit Release

 


 

   Access Control Magnetic Door Lock Exit Buttons


 

 

 

 

 

 

INFRARED TOUCH LESS DOOR SENSOR


This touch less door sensor operates using reflected infrared light. It can activate a door or relay when you wave your hand in front of it.
The sensor works by detecting infrared light at a pulsed frequency that matches the frequency of the emitter LED, built into the front of the device. This eliminates false operations due to infrared coming from nearby infrared sources like surveillance cameras and radiant IR illuminators.

- Sealed construction, safe for outdoor use
- Detection distance: 1.2" to 3.9" (3cm to 10cm)
- Adjustable range and sensitivity
- Encoded signals prevent interference from nearby radiant IR light sources.
- Bicolor LED indicates activity/standby
- Power: 12VDC @ 25mA max. during activation (15mA during standby)
- Can be used with or without included mounting plate
 

Dimensions:
Sensor: .98" x 1.4" (23mm x 35mm)
Mounting plate: 1.5" x 4.5" (38.1mm x 114.3mm)

 

$58.33

Quantity:

 

 

 

 

GANG-BOX SIZE PUSH TO EXIT MAGNETIC DOOR LOCK EXIT BUTTON


- Illuminated button (12 VDC)
- Illumination lamp max 60 V 1.2 watts
- Temperature range -20~55
- Contact rating: 3A @ 300 VAC max
- Single pole N.O./N.C. momentary action
- Mechanical life: 1,000,000 cycles min.
- Durable stainless steel plate
- Dimensions: 120x76.2x82mm

 

$39.94

Quantity:

 

 

 

 

 

SMALL PUSH TO EXIT MAGNETIC DOOR LOCK EXIT BUTTON

 

- Illuminated button (12/24 VDC)
- Illumination lamp max 60 V 1.2 watts
- Temperature range -20~55
- Contact rating: 5A @ 240 VAC max
- Single pole N.O./N.C. momentary action
- Mechanical life: 1,000,000 cycles min.
- Durable stainless steel plate
- Dimensions: 100x35x24mm


$49.69

Quantity:

 

 

 

 

 

SLIM LINE STAINLESS STEEL PUSH TO EXIT MAGNETIC DOOR LOCK EXIT BUTTON

 

- Illuminated button (12 VDC)
- Illumination lamp max 60 V 1.2 watts
- Temperature range -20~55
- Contact rating: 5A @ 25 VAC max
- Single pole N.O./N.C. momentary action
- Mechanical life: 1,000,000 cycles min.
- Durable stainless steel plate
- Dimensions: 115.3x43.7x38mm
- Back box included


$52.72

Quantity:

 

 

Exit button with two-color ring LED and acrylic chrome construction.

 

 

 

 

 

 

SLIM BI-COLOR ILLUMINATED EXIT BUTTON

 

This exit button is made of chrome acrylic material and incorporates a ring-shaped LED that can light in RED or BLUE mode (BLUE shown in image at left), or both, under control of an external door control device.

 

- Ultra-slim design

- Intended for surface mount installation

- Brushed-aluminum finish

- Push button N.O. switch

- Waterproof (IP65)

- Built-in over current protection

- LED voltage: 12VDC

- Input voltage: 5-24VDC

- Switch current: 100mA

- Pre-wired with 5-conductor connector

 

NOTE: Only works in conjunction with ES-AC900, ES-AC950 or ES-AC995 or similar proximity card readers. Cannot be used to directly control or activate a door lock. Dimensions: 44.45mm x 82.55mm x 6.35mm (1.75" x 3.25" x 0.25")

$39.00

Quantity:

 

 

Illuminated push to exit button with bi-color LED.

 

 

 

 

 

 

 

WIDE BI-COLOR ILLUMINATED EXIT BUTTON

 

This exit button is made of chrome acrylic material and incorporates a ring-shaped LED that can light in RED or BLUE mode (RED shown in image at left) or both, under control of an external door control device.
Ultra-slim design

- Intended for surface mount installation
- Brushed-aluminum finish
- Push button N.O. switch
- Waterproof (IP65)
- Built-in over current protection
- LED voltage: 12VDC
- Input voltage: 5-24VDC
- Switch current: 100mA
- Pre-wired with 5-conductor connector

NOTE: Only works in conjunction with ES-AC900, ES-AC950 or ES-AC995 or similar proximity card readers. Cannot be used to directly control or activate a door lock. Dimensions: 69.85mm x 82.55mm x 6.35mm (2.75" x 3.25" x 0.25")

 

$39.00

Quantity:

 

Request to Exit Detector

 

Voltage: 12 ~ 28 V DC, Power Consumption: 50 mA, Dimensions mm: 45 x 48 x 190, Unlocks or shunts door automatically, hands-free, no buttons to push.

 

$97.95

Quantity:

 

DVR HDD STORAGE CALCULATOR - CAREERS - CCTV SOLUTIONS - PRIVACY STATEMENT - SITE MAP - STATES CCTV LAWS

 

Copyright © 2012  ESLI Surveillance LLC - 2417 Jericho Tpke. #312 Garden City Park, NY 11040