Biometric Fingerprint Proximity Card Reader

Works with ACC1000 Door Controller

Was $999.00

Sale$625.00

*FREE Ground shipping lower 48 US States ONLY!  Details

- Large capacity of fingerprints
- Use standalone mode or with PC connection
- Short response time
- Backup recognition mode for pool fingerprints, password or ID card
- High recognition rate
- Master card range assignable
- Card capacity up to 10,000 users
- One RS-485 port supported for networking
- Supports fingerprint database download and upload
- Built-in watchdog to prevent the system from halting
- External reader port 26/34 bit Wiegand format for Anti-pass-back
- Alarm function available (Tamper, Force Entrance, Door Open Too Long)
- Keypad locks for 30 seconds, while continuous error operation
- Universal serial port supported for LED display, printer,  lift controller, ETC

- RF Frequency / Reading range 125 kHz / 10-18cm
 

Compatible with ACC1000 panel

Computer hookup device CN550

Weatherproof Indoor/Outdoor Proximity Card Reader

Works with ACC1000 Door Controller

Was $202.00

Sale $136.00

- Big and clear LCD display with 4 line text display (1024x64 Graphic)
- Unlimited site codes
- 11 sets of Time Zones
- Different time zone for each user
- Set up to 120 holiday schedules
- Auto-show work status (Set Via Time Zone Edit)
- Master cards range assignable
- RS-485 port supported for networking (Via Controller or Directly)
- Built-in door sensor and arming inputs (On/Off)
- Auto open & close scheduling of doors
- Control mode, card capacity and card type assignable by user directly
- Built-in proximity reader and external wiegand reader port
- Auto-discriminating between stand-alone & networking system
- Alarm function available (Tamper, Force Entrance, Door Sense)
- Networking: RS-485, 9600, N, 8, 1
- External reader port: Suitable for all WG, ABA reader, 125K, 13.56M (Mifare) or 2.4G reader
- RF Frequency / Reading range: 125KHz / 10-18cm
- Door relay: 2A/12 VDC N.O./N.C./COM 0.1~600 sec. Latch type
- Alarm relay: 2A/12VDC N.O./N.C./(Jumper) 0~600 sec. (COM Common)
- DI Input: Egress button / door sensor / arming switch
- Transistor output: Arming / door sensor / card sensor
- Tamper switch Limit switch (Form C)
- Serial port: Supported for AI-401R016, LED display, relay board, printer ETC. (4800, N, 8, 1)
- Material: ABS
- Dimensions: 127(L) x 91(W) x 46(H)mm

Compatible with ACC1000 panel

Computer hookup device CN550

Illuminated Proximity Card Reader

Was $189.00

Sale $142.86

*FREE Ground shipping lower 48 US States ONLY!  Details

Ask about the ECL-ACC980IP IP model available - let's you connect via LAN or WWW to setup & program your card reader.
Click here to download a full spec. sheet (PDF format) for the ECL-ACC980 and ECL-ACC980IP proximity card readers.

The EC-ACC980 (and EC-ACC980IP) proximity card reader is an advanced access control device in a weather-proof case. It reads proximity cards and has an illuminated touch panel to accept personal identification numbers (PINs). It can operate in network or standalone mode.

Maximum card distance is approximately 18cm depending on weather conditions and setup. Constructed of tough ABS plastic, aluminum alloy and sealed against the weather.

- Indoor/outdoor design

- 3 modes - card only, card OR PIN, card AND PIN

- Backlit, illuminated keypad

- LED and beeper for feedback

- 1024 users

- 1200 event logs

- Anti-pass back support

- 11 time zones

- Tamper resistant switch

- RS485 communication interface

- Power: 12VDC (not included)

- Dimensions: 5" x 1.5" x 3.25" (127mm x 38.1mm x 82.6mm)

Compatible with ACC1000 panel

Computer hookup device CN550

Dual Tech Network Proximity Card Reader

Works with ACC1000 Door Controller

Was $139.00

Sale $99.00

- 12 numeric keypad, 1 bicolor LED (Green and Red) and  buzzer indicator)
- 11 sets of time code
- 120 holiday schedules
- Keypad will lock for 30 second after continuous error operation
- Built-in watchdog to prevent system halting
- Support door relay auto-relock function
- RS-485 port supported for networking (Via Controller or Directly)
- Built-in reader and additional reader support port for exit or anti-pass-back function
- Control mode, card capacity and card type assignable by user directly
- RF frequency/Reading range: 125KHz/about 15cm
- Networking: RS-485, 9600, N, 8, 1
- External reader port: Suitable for all WG, ABA reader, 125K 13.56 (Mifare) or 2.4G reader
- Door relay: 2A/12 VDC N.O./N.C./COM 0.1~60 sec. Latch type
- Alarm relay: Transistor output/Serial output (Selective)
- Tamper switch: External AR-401R016
- Serial port: Limit switch (Form C)
- Material: ABS - Dimensions: 112(L) x 76(W) x 25(H)mm

Compatible with ACC1000 panel

Computer hookup device CN550

Long Range Reader

Was $409.00

Sale $289.00

*FREE Ground shipping lower 48 US States ONLY!  Details

This long range proximity access card reader is made of sturdy ABS plastic and can read a card from a distance of up to 60cm (23.6 inches) in optimum conditions.

- Depends on tags 33~60cm
- WG 26/34, ABA II, ASYNC 9600, N, 8, 1
- Material: ABS
- Power: 9~18 VDC
- Current: <4w
- Dimensions: 230(L) x 230(W) x 35(H)mm
- ECL-ACC220A proximity card (includes 2 pieces)

- RF Frequency / Reading range 125 kHz / 10-18cm

Outdoor Proximity Card Reader

Works with ACC1000 Door Controller

$109.00

This proximity access card reader is easy to install and is perfect for outside. Maximum distance is approx. 8cm (3.5 inches). Constructed of tough ABS plastic.

- Sealed design for outdoor use
- Futuristic designer looks
- Anti-pass back: multi-door when used with ACC1000
- Remote operation supported when used with ACC1000
- Wiegand port: 1 (WG26, WG34)
- Request to exit supported
- Reader range 8cm (3.5 inches)
- DI inputs: egress button, door contact, arming switch
- Made of ABS plastic
- Temperature/humidity: -10°C - 50°C (14°F - 122°F) @ 0-90% relative humidity non-condensing

- RF Frequency / Reading range 125 kHz / 10-18cm

Outdoor Wiegand Proximity Card Reader

$79.00

- Wiegand proximity card reader
- Simple installation
- Standalone or network operation
- Sealed for outdoor use
- Up to 1,024 users
- Low profile design
- Network interface: WG 26/34, ABAII, ASYNC 9600, N, 8, 1
- Available ports: tamper switch, Wiegand port
- Card users: card only: 65,536 (1,024 with card and pin combination)
- Anti-pass back: multi-door when used with ACC1000
- Wiegand port: 1 (WG26, WG34)
- Indicators: bicolor LED (green, red) and buzzer
- Remote operation: supported (using ACC1000)
- Reader range 8cm

- RF Frequency / Reading range 125 kHz / 10-18cm
- Request to exit supported
- DI inputs: egress button, door contact, arming switch
- Environment: suitable for outdoor use
- Construction: ABS body
- Voltage: 9-18 VDC variable auto detection
- Current draw 1 watt
- Temperature/Humidity: -10 deg. C -50 deg. C/0-90% Rh max
- Dimensions: 80 (L) x 43(W) 15 (H)mm